Huawei 5G CPE Pro Router is now available in many countries and is very popular based on the fantastic performance for internet connection. Actually, Huawei 5G CPE Pro has two variant models now. The two models numbers are H112-372 and H112-370. Somebody may ask what the difference is between the Huawei H112-372 and H112-370 5G CPE. Please check the table below the Huawei H112-372 and H112-370 Specs comparison:

From the table, we can see the difference between the two Huawei 5G CPE variant models.

The post Huawei 5G CPE PRO H112-372 VS H112-370 appeared first on 4G LTE Mall.

HTC was one of the first manufacturers to introduce a 5G hub at MWC 2019, which was launched in the second quarter of 2019. It uses the new 5G mobile communication standard for fast data transmission and is primarily suitable for home use, but can also be used on the go. One of the main features on the front of the device is a large display. In addition, the HTC 5G hub will later support a cloud VR mode, in which a local player can be omitted.

High data transfer rates

Inside the HTC 5G Hub is a Snapdragon 855 Octa-core chipset, a CPU with Octa-core, which is installed in the latest 5G smartphones like the ZTE Axon 10 PRO 5G phone. With the Snapdragon X50 5G modem, the HTC 5G router supports maximum data transfer rates of 2.63 Gbps in the download and up to 287 Mbps in the upload. If no 5G connection prevails, the device can also switch to and work on 4G network. A fallback to older technology such as 3G or 2G can’t be done in the HTC 5G Hub.

Nevertheless, a mobile application is possible. In addition to power from a power outlet, the HTC 5G Hub also has a built-in battery. The capacity of 7,260 mAh should provide enough energy for a whole day. The battery is charged either with the enclosed power supply, via USB Power Delivery on the 9 Volt rail or with Quick Charge 3.0 via USB.

WLAN for up to 20 devices

If the HTC 5G Hub has established a connection to the 5G network, it distributes the signal via WLAN in its environment. Not only the usual IEEE 802.11a/b/g/n/ac standards are used, but also 802.11ax (WiFi 6). This means that the HTC 5G Hub can span not only the familiar 2.4 and 5 GHz frequencies but also a 60 GHz WLAN. However, only a few devices support this new standard so far. Wifi at 60 GHz has very high data transfer rates between the 5G WLAN router and the terminal, provided that there are no obstacles such as walls in the way.

However, the number of maximum connector users is limited. A maximum of 20 clients can connect to the HTC 5G Hub via Wi-Fi. There are four high-speed connections via 802.11ax. This limit can be quickly exceeded today in a household with various technical devices. Other Wifi access points usually support more connections, ie 32 to 64.

Integrated display and speakers

Visually, the HTC 5G Hub is more like a Google smart home hub rather than a traditional router. This is mainly due to the integrated touchscreen on the front of the device. This measures 5 inches and displays the contents in HD resolution with 720 x 1,280 pixels. In addition, two speakers for stereo sound and a microphone that pays constant attention to voice commands, are integrated.

The HTC 5G Hub is in the dimensions of 12.9 x 10 x 4.3 cm and weights 340 g and provides 4 GB of RAM and 32 GB of memory. If the internal memory space is insufficient, it can be expanded via microSD card. What exciting are the possibilities that the HTC 5G Hub can stream content to other devices such as a TV and the use of Cloud VR is also planned. A local player can then be omitted in the presentation of VR content. Instead, the data is streamed via cloud computing. This is made possible by the potentially low latencies of 5G. This requires a compatible 5G network that allows mobile edge computing.

Price and availability

The HTC 5G Hub is available for many network providers over the world. Together with the Tariff, you may get cheaper price. If you only get the single HTC 5G Hub, the price would be much higher.

The post HTC 5G Hub Review appeared first on 4G LTE Mall.

The Chinese manufacturer Xiaomi, bring his new 5G smartphones to the customer: Mi 9 Pro 5G. Comparting with the predecessor Xiaomi Mi 9, the new smartphone supports the new 5G mobile communications standard and also brings some interesting functions with it.

New 5G smartphone

The Xiaomi Mi 9 Pro 5G is not the first 5G cell phone from Xiaomi. The first 5G cell phone is Xiaomi Mix 3 5G. Of course, the device also works in older mobile standards such as LTE and 3G. As introduced, Xiaomi Mi 9 Pro 5G is to sport 30W Super Fast Wireless Charging technology. The device has already received TENAA certification which revealed some key specifications. The Mi Pro 5G cell phone will have a 6.39-inch display while running on Snapdragon 855 Plus SoC. The phone will feature up to 12GB RAM with up to 512GB internal storage along with a 4,000mAh battery.

Super Charge 30W Wireless Technology

Especially interesting is the charging function. The new Xiaomi 5G phone is the first smartphone that can be charged with 30 watts. The highlight of this event was Xiaomi’s Mi Charge Turbo technology, of course. Xiaomi claims that Mi Charge Turbo is the world’s first 30W wireless charging solution. With this, users can wirelessly charge a 4,000mAh battery phone from 0% to 50% in just 25 minutes, and up to 100% in just 70 minutes. This pitches the wireless charging solution to be higher than a lot of current generation wired charging solutions. The specifics of the working of this technology are not very clear at this stage since the presentation and source are in Chinese. Thus, the device is expected to be one of the fastest charged smartphones in the market despite large 4,000 mAh battery. In addition to wirelessly charging the smartphone, it can also charge other devices.

So far, it was only possible to buy the smartphones and other devices of the bustling manufacturer on gray imports or Chinese online shops. But the company wants to change that soon. Because it has announced that it intends to distribute its smartphones on many other markets officially.

Mi 9 Pro 5G Availability and Price

Xiaomi has not shared any launch and available details about the Mi Pro 5G. But a recent leak indicates that the company is pretty close to launching the smartphone. And the Xiaomi Mi 9 pro 5G price is not yet known, but considering Xiaomi style, it’s expected to be better than Huawei 5G smartphone Mate 20 X 5G and ZTE Axon 10 Pro 5G.

The post Xiaomi Mi 9 Pro 5G Smartphone Review appeared first on 4G LTE Mall.

Two months ago, Vodafone released its first wireless router that is compatible with the new mobile communications standard 5G. The new 5G wireless router converts the mobile Internet access into a WLAN hotspot, so that several smartphones, tablets and notebooks can connect with an Internet access. Like the predecessors Vodafone GigaCube and Gigacube Cat19, the manufacturer of the 5G router is also Huawei. The model is officially called Huawei 5G CPE Pro but for Vodafone under the name Vodafone GigaCube 5G.

According to Vodafone official sayings, data transmission rates of up to 2Gbps could be achieved in the 5G mobile network. This concerns the LTE access, over which most customers will initially be predominantly online, especially as 5G availability is still severely limited. The network operator does not reveal how fast users can surf via 5G. A footnote simply states that you can “surf faster” in the first 5G radio cells. Within the home network scores the bolide by using the WiFi-6 technology. This achieves data transfer rates of up to 4.8 GBit/s.

At the heart of the Vodafone GigaCube 5G is the Balong 5000 chipset, which is also used in the Huawei Mate 20 X 5G as a multi-mode modem. If the 5G network is not available, customers can also use the LTE, UMTS and GSM network for Internet access with the Vodafone 5G router.

Vodafone offers the 5G router along with the well-known GigaCube tariffs. “With speeds reaching up to 1Gbps,” said Vodafone at launch, “customers are able to access super-fast speeds and reliable Wi-Fi quickly. GigaCube is ideal for those waiting for their home or business broadband, who need a connection for a second home or who have a home office.”

It added: “The GigaCube can connect up to 64 devices at any one time and has a wifi range of 90 meters. Thanks to the low latency of 5G, this solution is perfect for small businesses who have multiple employees streaming or downloading at the same time. It is also particularly useful for businesses that don’t have a fixed location, or students and house shares.”

Here you can see the general Vodafone 5G GigaCube Specs:

• Network:5G/LTE
• Chipset: HiSilicon Balong 5000
• Wi-Fi:11 a/b/g/n/ac/ax; 802.11 n22*2 MIMO for 2.4GHz and 02.11ax4*4MIMO for 5GHz
• Ethernet Ports:2 x GE LAN (inc. 1 LAN/WAN)
• Memory:4GB NANDFlash/8GB DDR4
• External antenna port:2 x Ext. antenna ports (TS-9)(Buy Vodafone GigaCube 5G External Antenna)
• SIM port:1 x NANO USIM card slot
• Device model:Huawei 5G CPE Pro (H112-370)
• Dimensions:99mm x 107mm x 215mm

You can also check the Vodafone GigaCube 5G Router Review here: https://www.4gltemall.com/blog/vodafone-gigacube-5g-router-h112-370-review/

The post Vodafone GigaCube 5G – Vodafone First 5G Router appeared first on 4G LTE Mall.

Earlier this year, Netgear introduced the Nighthawk M2, a new mobile hotspot that transforms UMTS or LTE-based Internet access into a Wi-Fi hotspot to provide wireless network for multiple devices such as smartphones, tablets or laptops. The successor of the Nighthawk M1 supports LTE Cat. 20 and in theory allows data transfer rates of up to 2 Gbit/s downstream and 150 Mbit/s upstream.

In practice, there are hardly any 4G networks supporting such high data transfer rates. Is still worth the purchase of the mobile hotspot, which is not a bargain with a purchase? We had the opportunity to put the heavy square device to a thorough test.

The Netgear Nighthawk M2 mobile router comes in a convenient package. In addition to the router itself, there is the battery and a quick start guide with the power supply and connecting cable. The supplied battery has a capacity of 5040 mAh. The WLAN standards 802.11a, b and g are supported. The 4G mobile hotspot is working on 2.4 and 5 GHz. The Netgear M2 has a USB-A and USB-C as well as an Ethernet interface. There are also connection options for external antennas (Buy Netgear Nighthawk M2 External Antenna). The LAN port can be used to use a wired Internet access instead of the mobile modem and to redistribute it via WLAN.

Good workmanship and shiny surface

The processing of the Netgear 4G mobile router is impeccable. You can argue about the shiny surface. Here you can see very clear fingerprints very quickly, especially since the Nighthawk M2 has a touch screen, so it regularly gets into the embarrassment of touching the display. The complete initial setup can also be made via the touch-sensitive screen. A separate app or the web-based access to the M2 pocket WiFi router menu is possible, but not mandatory.

We have set up the router right on the touchscreen made, which was not easy. For one thing, the virtual keyboard is quite small due to the display size. So you always catch the wrong letter when typing. In addition, the screen does not respond as well to inputs as used by higher quality smartphones. If the setup of a network identifier (SSID) and the associated password worked quite well, then setting a (somewhat complicated) administrator password was not possible on the second attempt, so we skipped this step and later have made on the configuration via the Netgear Mobile App.

After the initial setup, the Netgear Nighthawk M2 mobile hotspot was immediately ready for use. The configuration for SIM cards is made automatically. As soon as the MiFi was set up, the availability of a firmware update was already displayed. We have installed this over the existing LTE data connection. In the process, around 160 MB of data was transferred. What changes the update brings is unknown. The internet connection via the Netgear Nighthawk M2 was very stable in the test for several hours. It did not matter if we used an Apple iPhone XS Max, a Samsung Galaxy S10+ or an Apple MacBook Pro.

The display of the router shows the current data consumption, the ID of the SIM card provider and the network technology used. There is also a small S-meter, which provides information about the quality of mobile reception. The battery level is also displayed. By default, you can also find the names of the Wi-Fi hotspot and the password via the touchscreen. This display can be deactivated if desired.

Numerous settings are possible via the touchscreen menu. First, there is a WPS function. Then the user can limit the hotspot to one of the two WLAN frequency ranges (2.4 or 5 GHz). The connected devices can be displayed and, for example, you can specify whether the hotspot is put into standby mode after a period of non-use to save battery capacity.

Other features

Other possibilities are the restriction of Wi-Fi hotspots to a smaller reception area in order to save battery capacity or the automatic WLAN detach when USB tethering is used. The brightness of the display can be adjusted and the user can decide whether he wants to use the Internet access only in the home network or in international roaming.

SMS messages can be sent and received via the Netgear Nighthawk M2. As we have already mentioned regarding the initial setup: The touch screen does not always respond reliably to inputs and the virtual keyboard is quite small. Apart from that, the menu is functional and intuitive to use.

Good performance even in mobile operation

With a SIM card from Vodafone, we have achieved data transfer rates of up to 110 Mbps in the downstream and 61 Mbps in the upstream. This is far from the peak speeds that the Netgear Nighthawk M2 allows, but is more or less equivalent to what the mobile telecom Internet access does with the smartphone. Even in mobile mode, such as a Wi-Fi hotspot in the car, the router performed well in the test. At speed 120Mbps on the highway, the performance of Internet access was still fine. Compared to a WLAN adapter such as the Huawei E8377 CarFi, the Netgear device earns more scores by the possibility to connect an outdoor LTE antenna. In regions with bad LTE coverage, a magnetic base antenna on the car roof provides a significant improvement in reception, which also affects the performance of Internet access.

Conclusion: Good hotspot with slight weaknesses

Although Netgear Nighthawk M2 is well-made and provides stable Internet access for up to 20 devices, flaws such as the only moderately good touchscreen provides bad experience for users. For almost half of the purchase price, the Netgear Nighthawk M1 is available, which supports data transfer rates of up to 1 GBit/s via LTE, more than what the nets usually give out, so this model offers the much better price/performance ratio.

The post Netgear Nighthawk M2 – Fastest LTE Router Test appeared first on 4G LTE Mall.

FRITZ!Box 6850 is a latest 5G wireless router from the Germany telecommunication manufacturer AVM. According to the AVM sayings, the FRITZ!Box 6850 5G router is the world’s first all-in-one router for next generation mobile communication. The new FRITZ!Box for 5G supports 5G bands in the Sub-6 GHz range and current LTE bands in Europe. Equipped with a 5G/LTE connection, it offers users high-performance equipment with fast dual-band wireless LAN, telephone system and a variety of connection options for wired networking. Four gigabit LAN ports and a fast USB port are included. With a DECT base station and connection for analog telephones, the FRITZ!Box 6850 5G provides the user with a central exchange for a Smart Home system and cordless telephone.

Thanks to FRITZ!Box 6850 5G, the well-known home networking convenience of a FRITZ!Box as Mesh Master is available to the user in wireless LAN, telephone, Smart Home and 5G networks. In addition, the many functions such as firewall, parental control, wireless guest access and remote access can be used via the 5G/LTE port. The intelligent positioning aid in the FRITZ!Box 6850 5G helps users to find the best location for the router and ideal orientation for mobile communications antennas. The new wireless standard provides high bandwidth of more than 2 GBit/s and reduced latency. That makes the FRITZ!Box 6850 5G, in elegant and compact housing, especially attractive for use with real-time applications such as virtual reality and gaming.

The FRITZ!Box 6850 5G router is expected to be available in the first quarter of 2020. At the market launch, the price will be known first.

FRITZ!Box 6850 5G Technical specifications:

• 5G router with 4 x 4 MIMO with Qualcomm SD X55 chipset
• 5G band support: sub-6 GHz
• LTE (4G) for band 1, 3, 7, 8, 20, 28, 32
• Also supports UMTS (3G)
• Dual Band WLAN AC + N with up to 1266 MBit/s
• Two SMA connectors for attaching external antennas
• Four Gigabit LAN ports and 1 USB 3.0 port
• Telephone system and DECT base for up to six telephones and smart home applications
• Connection for analogue telephone or fax
• FRITZ! OS: with mesh, parental control, media server, FRITZ! NAS, WLAN guest access and MyFRITZ!

The manufacturer AVM has announced that it will have additional products at this year’s IFA. In addition to the 5G-capable router model, the FRITZ! Box 5550 and the FRITZ! Box 5530 will be available with two models for all common fiber optic connections. We will follow this when there is news here.

The post FRITZ!Box 6850 5G Home Router Released appeared first on 4G LTE Mall.

HTC 5G Hub is a new 5G mobile broadband combining the wireless router with Android Tablet and working as a home or office modem for people who intend to use 5G network. From the appearance, the HTC 5G hub looks more like Amazon Eacho show or Google Nest Hub, rather than a 5G NR router.

HTC 5G Hub Appearance

HTC 5G Hub has a 5-inch compact and handsome smart screen and gray fabric surround, which makes it look attractive and professional. The dimension of HTC 5G Hub is 129 x 100 x 43 mm, and it weights 340g. The HTC 5G Hub is much larger than the usual 4G mobile hotspot such as Netgear Nighthawk M2 and Huawei E5788. So it’s good to use the HTC 5G Hub on a desk, but not good to take it in a pocket or on the go.

It also has a large battery of 7660mAh capacity and comes with a big, chunky power adapter to charge it. On the back, there are both a USB-C port and a full-scale Ethernet port that can even attach to external routers.

HTC 5G Hub Specifications

The Hub is running Android 9.0 operating system like a Android tablet with with a 5 inches, 1280 x 720 screen, no cameras, and no traditional phone dialer, and of course all Google services onboard. You can run video services on the Hub and cast them to Chromecasts or compatible TVs. When it’s working, the status screen will show how it works as a hotspot. You can run arbitrary music services and use the Hub as a speaker. Or you can install Pocketshare and use the Hub as a NAS. It has 32GB of onboard storage, 10GB of which is taken up by system files, but you can add a microSD card for additional storage.

The product supports the powerful Wi-Fi capabilities of the Snapdragon 855 platform with the Qualcomm 60GHz multi-gigabit Wi-Fi chipset and next-generation Qualcomm 2×2 Wi-Fi 6-capable chipset for capacity, efficiency and performance. The unique device provides smooth 4K video streaming, LTE/5G mobile hotspot capabilities for up to 20 users, and low-latency games. As a home media center, the HTC 5G Hub uses next-generation LTE / 5G speeds to stream 4K video to a second screen for crisp, clear images. It can also replace a 4G Wi-Fi router and avoid unnecessary cables, while being easy to set up with a plug-and-play setup.

The big battery is pretty great, when just working as a hotspot, we got about 32 hours of 4G audio streaming to one device. Its high-end equipment and large body can give it excellent dual-band 802.11ac Wi-Fi performance. Users can also use the USB-C port to charge other devices, with Qualcomm’s QuickCharge 3.0 onboard.

HTC 5G Hub Supported Frequency Bands

Here now we have the Australian version HTC 5G Hub and it supports LTE bands 1/2/3/4/5/7/8/12/20/28/66 and 5G band n78. And actually, HTC 5G Hub has another version for US market and the network provider Sprint, which supports LTE bands 2/3/4/5/7/8/12/13/26/26/41/66/71 and 5G band n41.

The Hub also works as an 802.11ad hotspot for up to four devices. 802.11ad, also known as WiGig, is a short-range, very high speed networking system that Qualcomm is trying to promote right now. There are no mainstream 802.11ad clients available. Below are the general highlight functions of the HTC 5G Hub:

• Next generation LTE / 5G speeds
• Internet for the whole family with up to 20 devices
• Streaming games over 5G with Nvidia GeForce Now and Google Stadia (after release 2019)
• Streaming videos and music
• Intuitive voice and remote control
• Pre-installed company VPN at high speed
• Fully encrypted with Remote Wipe
• Use as a charging station for additional USB-C devices such as smartphones, tablets and laptops

The post HTC 5G Hub Review appeared first on 4G LTE Mall.

Alcatel EE70 is a high-quality pocket 4G/3G WiFi router, primarily designed to work in the network of mobile operators Vodafone, Kyivstar and Lifecell for Ukraine, or other operators around the world. Full support for working in 4G/3G networks, at a maximum data transfer rate of up to 300 Mbps using 4G LTE technology and 43.2 Mbps using HSPA/HSPA+ technology. For work, it is necessary to install a SIM card of any GSM operator in the router, an Internet connection will automatically occur, without additional settings. It’s suitable for home use, trips or foreign travel, as well as for use in the countryside as a home access point.

Design and Management

The 4G Alcatel EE70 router is small, compact, lightweight, fits in your trouser or shirt pocket, and you can take it with you everywhere. The Alcatel EE70 router is made in a yellow-black combined case made of high-quality plastic (in the spirit of the company’s latest developments). On the front panel of the case are LED indicators of the device – the signal strength of the cellular network, battery level, WiFi activity and received messages. Settings are managed via the settings web interface. Above is the power button, below are a slot for charging Micro USB format. Under the back cover there is a battery, under it there is a SIM card slot.

Compatibility

The Alcatel 4G Router is very easy to configure and use. You just need to connect it via WiFi to your phone, computer, or laptop, after a few seconds you will be connected to the Internet. OS Support: Windows XP, Vista, 7, 8, 10, Mac OS X, Linux. The Alcatel EE70 model with a 2150 mAh battery can last up to 8 hours without recharging. The device is charged from the 220V network using the power supply that comes with the kit. It is also possible to charge the router from a car charger or from a computer’s USB port.

Additional features

The Alcatel EE70 has a dual-band (2.4 GHz and 5 GHz) Wi-Fi module 802.11 a/b/g/n/ac, which provides a reliable wireless WiFi network within a range of 15 meters, which can connect up to 20 devices at the same time. All types of devices with WiFi module are supported: smartphones, tablets, laptops, set-top boxes, TV, etc.

Below you will see the general specifications of Alcatel EE70 MiFi:

* 4G LTE Mobile WiFi hotspot

* Frequencies: 2G 850/900/1800/1900MHz || 3G 900/1800/2100MHz || 4G 800/1800/2600MHz

* LTE download speed up to 300Mbps, upload speed to 50Mbps

* WiFi 802.11 a/b/g/n/ac, dual-band (2.4 GHz and 5 GHz)

* Technologies: GSM GPRS / EDGE, UMTS, HSDPA, HSPA, HSPA +, DC-HSPA +, LTE

* WiFi support up to 20 wireless devices

* Removable battery of 2150mAh

The post Alcatel EE70 LTE Cat7 Mobile WiFi Router Review appeared first on 4G LTE Mall.

Huawei presented a new mobile 5G routers to the public with the latest 5G smartphone – Huawei Mate 30 5G and Mate 30 Pro 5G. The device with the name Huawei E6878-370 was already announced in early 2019 at the MWC, but apparently Huawei has changed the design again and they look like different models.

The Huawei E6878 is a little bit big and heavy compared to other mobile hotspots, but it’s still easy to hold in one hand. This is probably mainly because the new Huawei 5G WiFi Router has integrated a 8,000 mAh battery. In power-hungry 5G operation, the battery should provide very good battery life.

The Huawei 5G mobile WiFi E6878 can also be used as a power bank, but in addition to the USB type C port, a full-size USB port is also available. Even wireless reverse charging is supported by the router.

On the front of the Huawei 5G Mobile WiFi E6878, there is a small display. Unfortunately, the display is very heavily mirrored; in the bright light you could hardly see it. The operation and configuration can also be done via the Huawei Mobile WiFi app or via a browser web interface.

There is a slot for a SIM card and two buttons on the side. Unfortunately, the battery is not replaceable by the user, while the competitor Netgear all mobile router models have standard replaceable batteries. However, the Huawei E6878-370 not only has the fast battery charging function with up to 40W (Super Charge), but also the 8000 mAh strong battery can charge other electronic devices.

The chipset of Huawei E6878-370 5G Mobile WiFi is a HiSilicon Balong 5000. Of course, the 5G modem is backwards compatible with 4G/LTE, 3G/UMTS and 2G/GSM. According to the official sayings, Huawei E6878-370 could achieve download speed up to 1.65Mbps and upload speed up to 250Mbps. This speed is much faster than the speed from the predecessor Huawei E5788, which can already achieve 1 GBit/s downlink.

However, the Internet connection via WiFi 6 is unavailable, which was introduced to be available. Of course, the 5G WiFi router is also backwards compatible with older WLAN standards. Unfortunately, the Huawei E6878 is not equipped with RJ45 Ethernet LAN port, so you have to rely on the USB port, if no Wi-Fi can be used or may.

The Huawei 5G Mobile WiFi will be available to buy at the end of 2019 in various global markets. If the 5G networks will not be available in short time at your location, you may check the budget 4G mobile WiFi Huawei E5788.

The post Huawei 5G Mobile WiFi E6878-370 Review appeared first on 4G LTE Mall.

HTC has become quiet in recent years; It is surprising that HTC plays a leading role in the new 5G mobile communications standard by launching the HTC 5G Hub in Europe, which is the first 5G mobile WiFi hotspot with Android OS.

Technical specifications

The HTC 5G Hub is more than a simple mobile Wi-Fi hotspot with 5G modem. It can be an entertainment machine, which can easily output 4K content via Display Port to appropriate monitors. Below are the technical specifications for reference.

• 129 x 100 x 43 mm, 340 grams
• Qualcomm Snapdragon 855 SoC
• 4GB RAM, 32GB internal memory + MicroSD
• Qualcomm Snapdragon X24 LTE Cat20 Modem
• Qualcomm Snapdragon X50 5G Modem
• 5 inch TFT display with 1280 x 720 pixel resolution
• Android 9 with HTC interface
• WiFi 802.11b/g/n/ac/ad
• 7,660 mAh battery (not changeable)
• USB-C 3.1 with Display Port function
• RJ45 Gigabit Ethernet port

Appearance and Package

The package connect is very clear. In addition to the 5G hub itself, there is a power supply with an output power of 12V / 2.5A included. The power supply has a proprietary connector and the cable is firmly connected to it. Basically, the 5G Hub can also be easily charged via USB C. The fairly heavy weight of 340 grams presumably caused mainly by the strong battery. The weight does not bother because the dimensions unfortunately do not allow the 5G gadget to be carried in the pocket.

The power button on the top of the HTC 5G Hub is the only physical button. It provides a good pressure point and, in addition, enables the activation or deactivation of the display with a short push of a button.

Fast modem with LTE and 5G

HTC has adopts two mobile modems to the 5G WiFi router: the Qualcomm Snapdragon X24 modem is integrated into the Snapdragon 855 SoC and allows LTE Cat20 with speeds of theoretically up to 2 GBit/s in the downlink. Over 5G theoretically up to 2.63 GBit/s in the downlink and up to 287 MBit/s in the uplink can be achieved.

In test practice, we have achieved speeds of over 150 Mbit/s in the LTE network from Vodafone, and the peak can reach to 308 Mbit/s in the downlink. In the uplink it went up to about 80 MBit/s high. The latencies (ping) were at least 17 milliseconds – a top value for LTE.

In the 5G network, we reached speeds of up to 1.3 GBit/s in the downlink. Speeds ​​above 1 Gbit/s were by no means rare. However, for such data rates, there must be line of sight to the 5G location. At around 400 meters without line of sight, around 600 MBit/s were still possible in the test, after which the HTC 5G Hub switched to the LTE network.

Basically, the impression was that the range of the 5G radio cells is limited to a few hundred meters. Once 5G reception is available, however, the data rates in the downlink are fantastic high.

Wi-Fi with restrictions

Of course, a mobile Wi-Fi hotspot with a mobile modem must have a reasonable Wi-Fi module. This requirement is met by the HTC 5G Hub. First of all, the positive: up to 20 devices can be connected to the 5G hub at the same time, the wireless standards 802.11a/b/g/n/ac/ad are supported.

In particular, the support for the fast ad-WLAN to 60 GHz is remarkable, which no other mobile hotspot offers. However, there are also virtually no devices that can connect via wireless ad. So we could not test it.

The WLAN range is very neat for a mobile router. You cannot expect the performance of a good stationary router, but you can easily cover a large meeting room or apartment of up to 60 square meters. Unfortunately, the HTC 5G Hub is not a dual-band WLAN, so you have to choose between 2.4 GHz and 5 GHz.

A WLAN repeater function (WLAN Extender / WLAN Offload) is not available, so there is no way to use an existing WLAN as an Internet access type (eg hotel WLAN). Other mobile hotspots, such as Netgear Nighthawk M2 or Huawei 5G mobile WiFi, provide this function.

On the positive side, HTC queries the configuration of the Wi-Fi hotspot as soon as the 5G Hub is powered up for the first time. Thus, the WLAN name, WLAN password and other settings can be made directly to the start and do not have to be searched through the menu afterwards.

Connections, rechargeable battery

The HTC 5G WiFi Router has an RJ45 Ethernet LAN port on the back. So you can connect wired devices such as a classic desktop PC to access the Internet. In addition, the USB-C port is also usable. Unfortunately there are no connections for an external antenna.

This is usually standard on other mobile hotspots, especially in this price range. You also miss a full-size USB port (type A), because the strong battery would be ideal as a power bank.

The battery held 24 hours in the test in hotspot operation. Such a long runtime is exceptional for a mobile hotspot.

Android OS with adjustments

The HTC 5G Hub has Android operating system, which is also a special feature for a mobile hotspot. Former HTC users will also immediately see similarities with some HTC smartphones, as the user interface has been slightly adapted by HTC.

If you use the 5G hub in network operation, a simple, but very stylish standby screen with time and network display is permanently displayed. In battery mode, the display remains dark when the router is not in use.

In addition to the standby screen, HTC has designed two home screens especially for the router mode. These are also very chic and show a few more information, including the number of wireless devices.

Of course, the Android operating system comes with all Google apps, including the Play Store, so you can install any apps. However, since the 5G hub does not seem to have a position sensor, apps sometimes do not appear in the correct mode or have graphical errors. The vast majority of apps work perfectly.

Multimedia Features

As already mentioned, the HTC 5G Hub is more than just a mobile Wi-Fi hotspot. The wedge-shaped design makes the device ideal as a small streaming device, such as for YouTube, media libraries, television or Internet radio. The rather low display resolution did not disturb the test, rather the strong reflections in the open air. The brightness is high enough.

The speaker offers a good quality, only in very loud setting it tends to be oversteer. As a mini TV while traveling, the HTC 5G Hub is definitely a lot of fun! Incidentally, thanks to the integrated microphone and Google Assistant, the HTC 5G Hub can also be used as a smart speaker.

Of course you could use all these multimedia features on a regular smartphone. But the HTC 5G hub is more fun because you do not need a stand case, the speaker is good and the smartphone remains free for other applications. Only the active fan disturbs the streaming enjoyment temporarily, because this is quite audible and runs almost in continuous operation in normal use.

In addition to streaming on the HTC 5G Hub itself, HTC also advertises the Display Port which can output 4K content to matching screens. I have not tested this, but have seen for example demos with the device in the 5G network and gaming applications. Thanks to the super fast Qualcomm 855 SoC, such applications for the 5G hub should not be a big challenge either.

Conclusion: More than a simple 5G hotspot

The HTC 5G Hub is a very good mobile 5G hotspot. If you have the opportunity to use the router in the 5G network, you will often be rewarded with speeds above 1 GBit/s. The router also performed very well in the LTE network.

The integrated battery, which offers a very long operating time, was also convincing. However, the unfortunately missing connections for external antennas and dual-band Wi-Fi are not good for a perfect mobile router. The support of 3G/UMTS would have been nice.

A very interesting and practical use for the HTC 5G Hub is as a small streaming machine. As a mini-TV or Internet radio, the router is really fun.

The HTC 5G Hub is available in many countries and the single price without contract is more than 800USD. Since 5G networks are not yet commonly available, the 5G device is still in high price.

The post HTC 5G Hub Test appeared first on 4G LTE Mall.

As early as February 2019, Huawei has released the first folding smartphone – Huawei Mate X. The global market launch continues to be delayed. The news shows Huawei Mate X would be available in China at the end of 2019. Luckily, we have the opportunity to get the Huawei Mate X in hand and you will read the details in this post.

If you didn’t know this phone, the Huawei Mate X is not immediately recognizable as a folding smartphone. Rather, the stately size in the closed state catches the eye. The Mate X is relatively wide so the people with big hands would hold it in one hand easily.

The workmanship is very good, but the device does not feel as high-quality as the other premium smartphones due to the flexible plastic-protected display.

The Huawei Mate X is relatively flat even when closed, it is then really thin when opened. Nevertheless, it is stable and the display back is quite high quality.

To open the display, a button on the back is pressed. It is slightly below the three cameras. The button has a good pressure point and “kicks” the display slightly outwards, you then have to unfold it yourself.

Folding feels a bit stiff at first, but this makes the device very stable. The mechanism leaves the impression that it can withstand many folding operations.

The display itself is very nice. It is very bright if desired, colors are AMOLED typical gaudy and the resolution is sufficiently high. In the unfolded status, only a very weak “fold” in the display cover is visible, which is more pronounced in competition model Samsung Galaxy Fold 5G.

The Huawei Mate X will be sold as a 5G smartphone. At the first speed tests in Sunrise’s 5G network , the device reached speeds of around 1 GBit/s in the downlink and up to 150 MBit/s in the uplink at the trade fair stand. A HiSilicon Balong 5000 5G modem developed by Huawei, is used.

The other 4G, 3G and 2G mobile technologies are handled by the Kirin 990 SoC, which is also used in the Huawei Mate 30 Pro 5G. Originally the Mate X should still come with the predecessor chipset Kirin 980 on the market.

Incidentally, Google apps were not installed on the test device on display, which is probably one of the reasons why Huawei has not provided any further information on a possible launch in Europe.  Perhaps due to the limit policy from Google, some other Huawei 5G smartphones also don’t have Google apps or service. We would take further test once we get this phone.

More details about the Huawei mate X 5G for reference:

The post Huawei Mate X 5G Hand On appeared first on 4G LTE Mall.

Netgear now also offers the world’s fastest mobile LTE hotspot – Netgear Nighthawk M2 with the model number MR2100. The Nighthawk M2 MR2100 allows downlink speeds of up to 2 gigabits per second. This makes it twice as fast as its predecessor Netgear Nighthawk M1 (MR1100) in 2018.

Qualcomm Snapdragon X24 LTE modem

Responsible for the high speeds is the most modern and powerful LTE modem that Qualcomm currently offers: the Snapdragon X24. In addition to 2 Gbit/s in the downlink (LTE Cat20), up to 150 Mbit/s in the uplink (LTE Cat13) are supported.

The speeds are made possible by the combination of different mobile technologies. For example, up to 5 frequency bands in the downlink and up to 2 in the uplink can be bundled (carrier aggregation). The support of 256QAM modulation as well as support of 4 × 4 MIMO antenna technology also contributes to the speed increase.

How fast the Netgear Nighthawk M2 is in the mobile networks, however, also depends on other factors such as network expansion and network utilization. Some network providers already offer some sites with 4 × 4 MIMO, 256QAM and multiple carrier aggregation, so that in certain situations, the modem performance can be used in any case.

Gigabit at LAN and WLAN

The Netgear Nighthawk M2 is a high-end 4G LTE router, so the price of Nighthawk M2 is higher than current 4G mobile routers. And the other technical features are also good. On the front there is a touch screen for operation; further settings can also be made via web interface.

Gigabit WLAN is available at 2.4 GHz and 5 GHz for connection to end devices and up to 20 devices can be connected simultaneously via WLAN. There is also a RJ45 Gigabit LAN port. If required, this can also be used as a WAN connection and thus replace the mobile radio modem.

Other connections: a USB type C port for charging the battery and for connecting to a computer and a USB type A port for charging other devices (power bank function) as well as for NAS functions.

On the side of the Netgear Nighthawk M2 are two TS-9 ports ready for an external UMTS or LTE external antenna. (If you need the 4G External antenna for Netgear Nighthawk M2, welcome to click: https://www.4gltemall.com/netgear-nighthawk-m2-external-antenna.html ). This can be very helpful in poor reception areas to improve connection quality. These features follow the predecessor Nighthawk M1 but very practical and helpful.

For world travel only partially suitable

With dimensions of 105 x 105 x 20 millimeters and a weight of around 240 grams, the Netgear LTE Hotspot is well suited for mobile use. The replaceable 5040 mAh strong battery allows a long operating time away from the power outlet.

For worldwide use of the Nighthawk M2, however, is only partially suitable, as a look at the supported frequency ranges shows. The Nighthawk M2 cannot use important LTE bands for the North American market, and the band 32 (1500 MHz), which is available in many European countries, is not supported.

Price and availability

The Netgear Nighthawk M2 is available in many online stores without a contract and without a SIM lock. The device can be ordered online from various electronics distributors such as 4gltemall.com or via the local mobile phone retailer. Here now only very few network providers such as Telstra in Australia had offered this new mobile hotspot.

The post Netgear Nighthawk M2 MR2100 Gigabit LTE Router appeared first on 4G LTE Mall.

A few days ago, Huawei also launched the 5G mobile WiFi hotspots in the model number of Huawei E6878, which will be available for 5G networks in China next month in addition to new 5G mobile phone.

As introduced by Huawei, the Huawei 5G moible WiFi is world’s first 5G dual-mode mobile WiFi hotspot. And the series have two models: one is the standard version and the other is Pro version. They got the official name Huawei 5G Mobile WiFi(Model Number: E6878-870) and Huawei 5G mobile WiFi Pro (Model Number: E6878-370). There are two colors for the 5G mobile routers: White and Black.

They are both with built-in Balong 5000 chipset, which can convert 5G signals into high-speed WiFi, allowing non-5G mobile phones, tablets, laptops, etc. to enjoy high speed. They can support 5G NSA/SA dual mode. Type-C connection speed can reaches 1.65Gbp, and WiFi connection peak speed can reach 867Mbps.

The Huawei 5G mobile WiFi has battery capacity of 4000mAh while the Huawei 5G mobile WiFi Pro version is with built-in large capacity battery of 8000mAh, and supports 40W Huawei super fast charge, 22.5W external wired charging and 15W reverse charging.

The Huawei 5G WiFi routers support AI high-speed rail mode, and the communication algorithm integrates AI technology to intelligently predict and switch better signals along the high-speed rail in advance to ensure signal stability. In addition, when the cell phone connects with Huawei 5G mobile WiFi hotspot, and the mobile phone game mode can be automatically turned on during the game, which significantly reduces the delay of the mobile game up to 30%.

The two Huawei 5G Mobile WiFi hotspots supports 4K 60FPS HD live broadcast, supports multi-channel upload aggregation technology, and 2-3 Huawei 5G mobile WiFi overlays, enjoying faster upload speed.

Huawei 5G mobile WiFi routers support cross-operating system transfer large files without loss and zero data consumption. Whether it is a mobile phone, a tablet or a laptop, it can be mutually transmitted under the same LAN.

To connect with the Huawei 5G mobile WiFi, it does not require a password, so you can go online. Scan the QR code generated on the screen in real time to quickly connect to Huawei 5G WiFi hotspots.

Finally, Huawei also pointed out that the 5G mobile WiFi hotspots can support mainstream 5G and 4G networks in 150+ countries or regions around the world. So it would be a global 5G pocket WiFi router for worldwide use. Unfortunately, Huawei only said that 5G MiFis will be available in December, but the price has not been announced.

The post Huawei Released New 5G Mobile WiFi Hotspot E6878 appeared first on 4G LTE Mall.

Together with various other products, AVM also presented the new FRITZ! Box 6850 5G at the IFA 2019 in Berlin. The Berlin-based company is thus the manufacturer of the world’s first all-in-one router for the new 5G mobile communications networks, which is available in more and more regions from 2019.

5G FritzBox: 3G to 5G on board

The flagship of the new FRITZ! Box 6850 5G is of course the support of 5G with sub-6 GHz . This allows bandwidths of more than 2 Gbit/s and low latencies. But also the older mobile radio standards LTE (4G) with the bands 1, 3, 7, 8, 20, 28 and 32 as well as UMTS (3G) are supported. For better reception, two SMA connectors are provided for connecting external antennas.

With the mobile networks, the 5G WiFi router allows further access to the Internet in addition to the classic DSL connection, where this new FRITZ! Box can of course also be connected. So it’s an all-in-one device that supports both mobile and fixed internet. In principle, it is similar to its predecessor, the 6890 LTE, since hybrid operation was also possible here.

WLAN with up to 1266 MBit/s

If there is a connection to the Internet, the FRITZ! Box 6850 5G with 4 x 4 MIMO, working with the Qualcomm SD X55 chipset, charges a WLAN. It supports dual band WLAN AC + N with 2.4 and 5 GHz including mesh. This allows transmission speeds of up to 1266 Mbps. In addition, four Gigabit LAN ports are available for connecting wired network devices.

5G router and telephone system in one

Of course, the AVM 5G router function includes that of a telephone system. This is no different with the new FRITZ! Box 6850 5G. It has a DECT base integrated so that up to six cordless DECT phones can be connected to it. In addition, it also offers a connection for an analog telephone or fax.

It is also interesting that the FRITZ! Box 6850 5G can be used as a smart home center. AVM offers a range of compatible products such as smart sockets, light bulbs and more that communicate with DECT radio. In addition, the FRITZ! Box 6850 5G also supports the typical features of AVM such as parental control, media server, FRITZ! NAS, WLAN guest access, MyFRITZ! and much more. The well-known remote access is also given at the 5G / LTE connection.

Market launch in early 2020

The market launch is only announced for the first quarter of 2020. The price is then also communicated, so we currently cannot know a price for the FRITZ! Box 6850 5G. However, this is likely to increase 20-30 percent above today’s 6890.

The post FRITZ!Box 6850 5G Router Review appeared first on 4G LTE Mall.

A few months ago, Huawei released the newest 5G portable WiFi router in China and huawei online store starts to sell this new mobile 5G hotspot. We got the new Huawei 5G Pocket WiFi yesterday and let’s have a close look at the new 5G gadget.

Huawei 5G Mobile WiFi E6878-870 Package

The Huawei 5G mobile WiFi hotspot is packed in a white box, which is similar to many Huawei devices such as Huawei 4G WiFi router, WiFi extender. Since it’s released for China market, the language in the box is Chinese, so as the user manual. In our test, there are two languages available in the web UI. On the front, the Huawei 5G mobile WiFi image is printed in white color with black face.

On the side label, it tells the product type: 5G wireless data terminal and model number: E6878-870. And the network standard, network entrance number, color, IMEI & S/N numbers are included.

Huawei 5G Mobile WiFi E6878-870 Appearance

The Huawei E6878-870 is in white and black color as showed below. On the front, there is a small LED screen which will show the connection status and other parameters. Unlike the predecessor model Huawei E5788u-96a, the Huawei 5G WiFi router can’t operate the setting through the display. The Huawei and 5G logos are on the front black. The power button and SIM card slot is at the edge side. Between them, there is a switch button, where user and press to switch the menus on the display to do simple settings. On the back, there is a small label showing the IMEI number and S/N number.

If you are unfamiliar with this new 5G pocket WiFi, you may thought it’s a new cell phone at first glance. The size of Huawei E6878 5G MiFi is much bigger than the predecessors, and it weights much like the Netgear Nighthawk M2 MR2100. The USB port is Type 3.0. There is no connector for external antenna. And it also has the Ethernet port like the Huawei E5885 Mobile WiFi hotspot.

Huawei 5G Mobile WiFi E6878-870 Operation

Press the power on, the display of Huawei 5G portable router E6878 will show the slogan: welcome to 5G. It will also tell users to log in the 192.168.8.1 in a browser to configure the Huawei 5G mobile router. However, the default language is Chinese. To switch to Engligh, users need to log in the 192.168.8.1 in a browser. At the right head of the web page, there are two languages optional. You can select English as preferred language. Then you can follow the guide to setup the Huawei mobile 5G router.

As mentioned before, users can setup the Huawei 5G pocket WiFi router through the power button and switch button at the edge side. When the Huawei E6878 MiFi working, press the power button, it will show the menu. The switch button is the function of Next and the power button is the function of Confirm.

Huawei 5G Mobile WiFi E6878-870 Price

Since the Huawei E6878 5G mobile WiFi Hotspot is new and recently available, the price is not cheap now. But we suppose the price would be down from 2020 when more and more competitors’ 5G mobile router will be available.

We will take further test in following days and we will share our test report later.

The post Huawei 5G Mobile WiFi E6878-870 Review appeared first on 4G LTE Mall.

Recently, Huawei official released two 5G mobile WiFi router to the public. The two Huawei 5G portable WiFi routers have the name “Huawei 5G mobile WiFi” and “Huawei 5G Mobile WiFi Pro”. And the specific model numbers for them are Huawei E6878-870 and E6878-370. If you had seen the pictures of two router 5G huawei, you may find they are very similar in appearance. However, they do have some difference. Then what’s the difference between the Huawei 5G mobile WiFi (E6878-870) and Huawei 5G Mobile WiFi Pro(E6878-370)? You may find the answer in following content.

Huawei 5G mobile WiFi Pro E6878-370 VS E6878-870 Appearance

At the first glance of the two Huawei 5G mobile WiFi Router, they look very similar at the color, display, body size and even the logo location. But after further checking on details, you may find the difference. Huawei 5G Mobile WiFi Pro is thicker and it has an USB output port, which is because Huawei 5G Mobile WiFi Pro has larger battery pack and it can charge other devices. The 5G logo on the front are located at different places. The SIM card slot cap on Huawei E6878-370(Mobile WiFi Pro) is longer than that on E6878-870.

Huawei 5G MiFi E6878-370 VS E6878-870 Specifications

Summary

From the table above, we can see the core specifications of Huawei E6878-370 and E6878-870 are very similar. They both support dual-mode 5G networks NSA and SA based on 7nm Balong 5000 chipset. And the 4G networks are backward compatible. They can both work on same 5G & 4G frequency bands. You can also enjoy almost same 5G speeds when using the two 5G mobile WiFi hotspots. However, there are some differences which also decide why the Huawei 5G Mobile WiFi Pro is more powerful:

1. Huawei E6878-370 (5G Mobile WiFi Pro) has a larger battery of 8000mAh, which is double of E6878-870. The large battery makes Huawei 5G Mobile WiFi Pro(E6878-370) working for longer time and it can charge other devices. However, the larger battery makes it thicker.
2. So Huawei E6878-370 (5G Mobile WiFi Pro) has a USB output port to connect other devices for wired charging.
3. What’s more, Huawei E6878-370 (5G Mobile WiFi Pro) can provide supercharge for other devices wirelessly.
4. Huawei E6878-370 (5G Mobile WiFi Pro) itself support 40W supercharge which makes it get full power in much shorter time.
5. Not only Huawei E6878-370 (5G Mobile WiFi Pro) provides cell phone gaming model and broadcasting mode (Huawei E6878-870 has the two working modes), but also it can provide AI high-speed railway working mode, which let the WiFi hotspot automatically search and connect with the nearest cell tower so that users can get fastest possible speeds when the railway is going at high speeds on the way.

Based on these differences, the Huawei 5G mobile WiFi Pro E6878-370 price is higher than that of E6878-870. So if you are looking for a 5G mobile WiFi hotspot, you may check which one is preferred.

The post What’s the Difference between Huawei 5G Mobile WiFi Pro E6878-370 and E6878-870? appeared first on 4G LTE Mall.

We had introduced the Huawei 5G mobile WiFi E6878-870 a couple of days ago. With this Huawei 5G portable WiFi router, Huawei also presented the brother/Pro model named “Huawei 5G mobile WiFi Pro”. The factory model for Huawei 5G mobile WiFi pro is E6878-370, which is similar to E6878-370 in the name and appearance.

Huawei 5G Mobile WiFi Pro Appearance

If you have read our blog about Huawei 5G mobile WiFi E6878-870 review, you may know the design of the latest Huawei 5G mobile WiFi hotspots. The Huawei 5G mobile WiFi Pro adopts almost similar design and colors. On the front, there is a black band which has located the small display, huawei & 5G logo, and the base for wireless charge between them. There is a USB type-A and a type-C port for wired charging. It also has a power button and menu button at the side of SIM card slot. The suitable SIM card size is also NANO-SIM.

The Huawei 5G Mobile WiFi Pro E6878-370 has larger battery pack and it has the USB type-A port to charge other devices, so it’s thicker than E6878-870. And of course it weights more than E6878-870.

Huawei 5G Mobile WiFi Pro Specifications

As the pro version of Huawei 5G wireless router, many technical specifications are same as the brother models.

Below are the general specifications of Huawei 5G Mobile WiFi Pro:

• Product type: 5G mobile WiFi router
• Brand: Huawei
• Model Number: E6878-370
• Chipset: Balong 5000 platform(7 nm)
• Support 5G/4G Networks
  • 5G network frequency bands: N41, N77, N78, N79
  • 4G network frequency bands: B1, B3, B5, B7, B8, B20, 28, B32, B34, B38, B39, B40, B41, B42
• Standard: Compliant with 3GPP Release 15
• 5G Data rates: downlink to 1.65Gbps, uplink to 250Mbps
• 4G Data rates: downlink to 300Mbps, uplink to 75Mbps
• WLAN:
  • 11 ac/a/n, 2×2
  • 11 b/g/n 2×2，MIMO
  • Speeds: 2.4GHz – 300Mbps, 5GHz – 867Mbps
• Interfaces:
  • 1 x Type-A port
  • 1 x Type-C port
  • 1 x SIM card slot(for Nano-SIM card)
• APP management: Huawei Smart Home APP
• Battery: 8000mAh
• Weight: 280g
• Dimensions: 148mm×72mm×18mm

Huawei 5G mobile WiFi Pro Unique functions

Comparing with Huawei 4G mobile WiFi hotspots such Huawei E5788u-96a, Huawei 5G mobile WiFi Pro has many unique and practical functions for users:

1. Huawei 5G mobile WiFi Pro is packed with a non-removable battery which not only support long time working, but also it can charge other electric devices via USB cable or wirelessly.
2. Huawei 5G mobile WiFi Pro supports 40W supercharge, which can make it get full power in much shorter time.
3. Huawei 5G mobile WiFi Pro can provide three working mode: AI high-speeds railway mode, mobile phone gaming mode and broadcasting mode. The AI high-speeds mode means Huawei 5G mobile WiFi pro can automatically select the best signal from cell towers at the side of railway to connect so that users can enjoy the fastest possible speeds. And the phone gaming mode would be useful for cell phone gaming players. The broadcasting mode would provide smooth data transmission for Internet celebrity.

Summary – Best 5G mobile WiFi Router

Based Huawei balong 5000 chipset, Huawei 5G mobile WiFi Pro can provide WiFi network for multiple users to surf the internet at high speeds. The powerful functions such large battery pack, SuperCharge and reversed charging, three working modes for different working scenarios. Since many other similar 5G mobile WiFi router such as HTC 5G hub, Netgear Nighthawk M2 don’t have these functions. We conclude the Huawei 5G mobile WiFi is the best 5G mobile WiFi hotspot till 2020!

The post Huawei 5G Mobile WiFi Pro Review appeared first on 4G LTE Mall.

Following a policy of product continuity, Telit recently accounced two new Narrow Band-IoT modules to the Telit portfolio, the NE310H2-W1 and NL865H2-W1. The launch of the two NB-IoT module NE310H2-W1 and NL865H2-W1 will address some of the major challenges OEMs, integrators and device designers have been facing. With a global set of bands from Telit unified family form factors, the LTE NB-IoT modules are ideal for 2G to 4G NB-IoT transition and offer the lowest power consumption for battery-driven applications that will help optimize cost. In addition to extending coverage for ubiquitous connectivity, use cases include smart metering for electricity, gas and water, smart city applications, smart agriculture and almost any type of industrial sensor or mass-deployment application—all of which benefit from low power and enhanced coverage without high data rate requirements.

With its 15x18mm LGA form factor, Telit NE310H2-W1 is perfect for size-constrained applications with low power consumption, pin-to-pin compatible with 2G and LTE-M modules of the miniature Telit xE310 Family. Optimized for ease-of-design, high yield and low-cost manufacturing, this module is compliant to 3GPP Release 14 Cat NB2. The NE310H2 is also backward compatible with 3GPP Release 13 and LTE Cat NB1 standard.

Telit NE310H2-W1 Specifications:

• Category: LTE UE Category NB2 (200 KHz)
• Target market: Worldwide
• Support 4G LTE Bands: B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66, B71, B85
• 3GPP release 14 compliant
• Half Duplex FDD
• Single Rx, single antenna
• 3GPP Rel. 12 Power Saving Mode(PSM)
• 3GPP Rel. 13 Extended Discontinuous Reception (eDRX)
• 3GPP Rel. 13 Extended coverage
• 3GPP Rel.13 Release Assistance feature
• Control via AT commands according to 3GPP TS27.005, 27.007
• SMS over NB-IoT
• IPv4/IPv6 stack with TCP and UDP protocol
• TLS / DTLS
• OMA Lightweight M2M (LWM2M)
• Over-the-Air firmware update

With its well-known and widely deployed 24.4×24.4mm VQFN form factor, Telit NL865H2-W1 guarantees a smooth evolution for all those customers that want to upgrade and future proof their devices based on Telit 2G and 3G xL865 module, with limited redesign effort and optional built-in eSIM available for the NL865H2-W1 for connectivity integrated in the module. It is also LTE UE Category NB2 compliant to the latest 3GPP Release 14.

Telit NL865H2-W1 Specifications:

• Category: LTE UE Category NB2 (200 KHz)
• Target market: Worldwide
• Support 4G LTE Bands: B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66, B71, B85
• 3GPP release 14 compliant
• Half Duplex FDD
• Single Rx, single antenna
• 3GPP Rel. 12 Power Saving Mode(PSM)
• 3GPP Rel. 13 Extended Discontinuous Reception (eDRX)
• 3GPP Rel. 13 Extended coverage
• 3GPP Rel.13 Release Assistance feature
• Control via AT commands according to 3GPP TS27.005, 27.007
• SMS over NB-IoT
• IPv4/IPv6 stack with TCP and UDP protocol
• TLS / DTLS
• OMA Lightweight M2M (LWM2M)
• Over-the-Air firmware update

According to Telit official sayings, the two Telit NB-IoT modules will be available in 2020 Q1.

The post Telit Announced New NB-IoT Modules – NE310H2 and NL865H2 appeared first on 4G LTE Mall.

A few days ago, Telit launched a new 5G industrial grade WWAN card in M.2 form factor. The model number is Telit FN980m. Based on the Qualcomm Snapdragon X55 5G Modem-RF System, the FN980m data card supports Sub-6GHz FDD/TDD and LTE Category 20 – 7x carrier aggregation. For millimeter wave operation the 5G M.2 data card can be paired with the Qualcomm® QTM525 mmWave antenna module for near-the-ground low power indoor and outdoor applications; it is currently the only 5G data card in the market that is compatible with the Qualcomm® QTM527 mmWave extended-range antenna module for high-mount outdoor applications.

The key specifications of Telit FN980m data card include:

• Telit 5G Module
• Chipset: Qualcomm Snapdragon X55 5G modem
• 5G Sub-6 and mm Wave FDD and TDD, SA & NSA operations
• 5G core network Opt. 3a/3x and Opt. 2
• 4G: 7CA, up to 20 layers DL / 3CA UL,256 QAM DL/UL
• 3G: HSPA+ Rel. 8 (DL/UL 42/11 Mbps)
• Data Rates:

– 5G up to 5.5 Gbps DL/2.7 UL Gbps
– 4G up to 2.4 Gbps DL/211 Mbps UL
– 3G up to 42 DL/11 UL Mbps

• GNSS: gpsOne Gen9 L1 band on dedicated RF connector, L5 shared with cellular
• Voice support: VoLTE, VoNR (under evaluation), PCM audio over USB
• 4 antenna connectors for LTE/Sub-6
• 4 mmWave antennas supported
• 5G FR1 Bands: n1, n2, n3, n5, n7, n12, n14, n20, n28, n30, n41, n66, n71, n77, n78, n79
• 5G FR2 Bands: n257, n258, n260, 261
• LTE Bands: 1, 2, 3, 4, 5, 8, 9, 12, 13, 14, 17, 18, 19, 20, 26, 28, 71, 25, 66, 39, 29 (DL), 30, 32, 7, 38, 40, 41, 42, 43, 46 (LAA), 48(CBRS), 34, 27
• WCDMA Bands: 5, 8, 3, 4, 2, 1, 9, 19
• 5G 4×4 MIMO support on bands n1, n2, n7, n66, n3, n77, n78, n79, n41 and n30
• 4G 4×4 MIMO support on bands 32, 4, 66, 3, 2, 25, 1, 30, 40, 41, 7, 43, 42, 46, 48
• Interfaces
  – 1.8/3 V SIM Interface
  – USB 3.1 gen2 and 2.0
  – PCIe gen3
  – Drivers support: Windows 10, Linux
• Electrical & Sensitivity
  – LTE/5G sub 6 Output power: -23 dBm (power class 3)
  – Supply voltage: – Nominal: 3.3 VDC
• Antenna types: 4x LTE/Sub-6 + 4x QTM525/527
• FOTA Support
• Operating temperature range: -40°C to +85°C
• Dimensions: 30 x 50 x 3.5mm

The Telit FN980m 5G data card is designed for use globally, incorporating support for all scenarios prescribed by the 3GPP for short, mid and long-term deployments of 5G, including non-standalone LTE-5G NR dual connectivity (EN-DC), dynamic spectrum sharing between LTE and 5G, and full 5G NR standalone mode.

The Telit 5G data card enables new opportunities and markets for original equipment manufacturers (OEMs), system integrators and service providers working with industrial routers and gateways, fixed wireless access, professional mobile high-resolution video broadcasting equipment and beyond.

OEMs in North America, Korea and Japan have already selected and designed in the FN980m data card, in application areas including the industrial IoT, enterprise networks and professional video broadcasting. Samples are currently shipping, with commercial shipments following in Q1 2020. Concluding regulatory certifications in multiple countries in Asia with operator and industry certifications expected for Europe and the Americas in Q1 2020.

The post Telit FN980m – First Industrial Grade 5G M.2 Data Card Launched appeared first on 4G LTE Mall.

Last month, ZTE Corporation, one of the major telecommunication supplier and network solution provider, launched a new 5G module in China. The 5G module model number is ZTE ZM9000, which is empowered by the second generation Snapdragon X55 5G Modem-RF System. ZTE announced they completed a 5G data connection with a 5G network through the ZTE 5G module ZM9000.

According to ZTE official sayings, ZTE ZM9000 5G module based on Qualcomm SDX55 platform covers the the 4G/5G frequency band of the three major Chinese operators and supports both NSA and SA networks. It provides M.2 package with encapsulation technology. With the plug-and-play function and dimensions of 30 x 52 x 3.6 mm, the ZTE 5G module can be used in a variety of industrial products, including security protection cameras, 5G 8K TVs, and HD conference terminals.

In addition, the ZTE ZM9000 5G module boasts ultra-low standby power and a wide range of available interfaces. ZTE plans to launch commercial use of the ZM9000 in December 2019. The device will be widely used in the fields of intellectual production, including autonomous driving and remote control systems, preventive maintenance of robotics, HD cameras, industrial gateways and oil production. Those well-known application scenarios, such as UAV, HD live broadcast, 5G 8K TV and cloud storage, will also be upgraded thanks to new 5G modules. More specifications of ZTE ZM9000 are unknown yet.

ZTE is working to expand the application of 5G technology with the transition from individual home systems and live HD broadcasts to innovative scenarios through the commercial implementation of a variety of 5G terminal devices – ZTE Axon 10 Pro 5G and the latest upgarded ZTE Axon 10s Pro 5G, 5G indoor router ZTE MC801, ZTE 5G Module ZM9000 etc.

Actually, many of ZTE’s competitors were already launched their 5G modules, please see below the 5G modules which will also be available in 2020:

Telit 5G module:

• Telit FN980
• Telit FN980m

Huawei 5G module:

• Huawe MH5000

Fibocom 5G module:

• Fibocom FB101
• Fibocom FB150
• Fibocom FG100

Quectel 5G module:

• Quectel RG500Q
• Quectel RG510Q
• Quectel RM500Q
• Quectel RM510Q
• Quectel AG550

Sierra Wireless 5G module:

• Sierra AirPrime 5G Module

SIMCOM 5G Modules:

• SIMCOM SIM8200EA-M2
• SIMCOM SIM8200G-M2
• SIMCOM SIM8200G
• SIMCOM SIM8300
• SIMCOM SIM8300-M2

LongSung 5G module:

• LongSung EX510
• LongSung EX520
• LongSung EX610

The post ZTE ZM9000 5G SA/NSA Module Launched appeared first on 4G LTE Mall.